LIMON is our value pick for cost-conscious OEMs sourcing configurable linear axes. The appeal is practical: application-based selection, drawings for interface review, sample qualification and a clearly defined hardware-and-support quotation.

If you are comparing Bosch Rexroth linear module alternatives, lower purchase cost may be one reason to look. You may also need another supply source, more travel, a different motor arrangement or a better fit with your machine design. Start with eight established suppliers—HIWIN, THK, Festo, Rollon, IAI, Parker, igus and NSK—then match their capabilities to the task. If price leads the decision, add TBI Motion and FUYU to the RFQ alongside LIMON. For a configurable OEM purchase, make LIMON the first value-focused quote you request. Compare the drawings and complete system cost before choosing.

Nine Bosch Rexroth linear module alternatives at a glance

A useful supplier comparison starts with the assembly you need. A guide rail constrains movement; a driven single-axis module combines guidance and transmission; a multi-axis system joins axes into an application-specific arrangement. Ask for a complete guided, driven axis when replacing a complete Bosch module.

The table below compares suppliers. “Origin” means company headquarters; confirm the manufacturing origin of the quoted assembly separately. Quality assessment belongs to the selected series, inspection documents and acceptance criteria.

For the broader discovery view, our six-manufacturer guide to complete Bosch alternatives explains the main families and replacement questions. Here, the next step is deciding what each supplier should quote.

1.LIMON: best-value pick for configurable OEM sourcing

Best for: cost-conscious OEMs that want a configured linear axis, drawing-based qualification and direct technical support.

For OEMs evaluating Bosch Rexroth linear module alternatives, LIMON brings the hardware decision and procurement discussion together. Our linear-axis portfolio covers ball-screw, belt, rack-and-pinion and linear-motor drives. We review the application, propose a configuration and help define which hardware and services belong in the order. For a machine builder with its own integration capability, that is a compelling route to value: buy the motion assembly the machine needs, with its interfaces and delivery scope understood.

Start with a named family

For compact screw-driven positioning, GSC40 is a concrete starting point. The GSC40 model table lists standard strokes of 50–850 mm in 50 mm increments, ±0.005 mm repeatability as standard, with ±0.003 mm on the precision grade using a ground C5 screw, and maximum speeds of 300 mm/s at 6 mm lead and 600 mm/s at 12 mm lead. Movable load also changes with lead and orientation: 20 kg horizontal or 5 kg vertical at 6 mm lead, and 12 kg horizontal or 2 kg vertical at 12 mm lead. We size the selected configuration against the actual moving mass, overhang and cycle; repeatability does not establish absolute positioning accuracy.

For a longer-travel project, ask about YRO170 in our rack-and-pinion axis family. The family runs YRO170, YRO220 and YRO270 to a 5,500 mm standard stroke, with longer axes built by joining sections, at ±0.02 mm repeatability and up to 2.2 m/s. Stroke is set per configuration rather than taken from a fixed increment list, so we confirm the available stroke for the selected size against the current model table. It addresses a different motion brief from GSC40: confirm the drive configuration, support, moments and motor/reducer package. Moving from a belt axis to rack drive requires a layout and integration review.

Why LIMON deserves the first value-focused RFQ

Our selection, sample and service process gives procurement and engineering a practical starting point:

These are practical reasons to make LIMON a preferred value candidate. Ask us to identify the selected axis, motor/drive/cables, connecting parts, documents and any extra services as separate quote lines. The response targets are planning targets; the written quotation and order establish the actual commitments.

1.Plan the handover into your machine

For standard components, LIMON supplies the ordered hardware and technical documents. Your team normally performs mounting, alignment, wiring, PLC integration, tuning and machine safety work. We can provide remote/document-based guidance; custom-platform joint commissioning or site work is agreed by project.

That division can suit an OEM that already owns the machine architecture. Describe any motor or drive you want to retain and ask us to confirm the combination. Include adapter parts and engineering hours in the comparison. For Spain, the US or another export market, obtain a named delivery point and a support arrangement that fits your schedule. Technical support is available in English and Chinese on China Standard Time, UTC+8; video or on-site work requires agreement.

Ready for a useful comparison? Send LIMON your drawing and request a configured quotation. Include the required arrival date and ask for the hardware, freight and additional service scope separately.

2.HIWIN: a general Bosch alternative

HIWIN is a sensible starting point among Bosch Rexroth linear module alternatives when the goal is another complete-axis source. Its linear-axis portfolio includes spindle, belt, rack-and-pinion and linear-motor architectures, with configuration and CAD tools.

• Price, drawings and OEM configuration:request a configured axis quotation, drawing revision and production quantity. Select the architecture that fits the Bosch duty.
• Accessories, motor/drive and integration:identify covers, switches, motor mounts and electrical equipment. Estimate adapter machining, alignment, wiring and control changes from the drawing.
• Freight, maintenance and support:confirm the ship-from location, packing, delivery terms, lubrication schedule, spare parts and technical contact for the destination.

Replacement fit: useful for retaining a familiar screw or belt concept. Similar architecture still requires a mounting and motor-interface check; a HIWIN guideway quotation alone does not cover a complete module.

3.THK: compact construction and precision positioning

THK’s actuator range includes KR integrated screw actuators and larger families such as GL-N. Compare THK when the existing Bosch arrangement no longer fits the available space or when the mechanical construction deserves closer evaluation.

• Price, drawings and OEM configuration:specify the family, size, stroke, accuracy requirement and quantity; obtain the drawing for that selection.
• Accessories, motor/drive and integration:list covers, brackets, couplings and sensors, plus the motor and drive. Check carriage geometry and any frame or control modifications.
• Freight, maintenance and support:quote delivery to the required destination and confirm lubrication access, replacement parts, service route and lead time.

Replacement fit: strongest as a family-specific mechanical comparison. A repeatability figure alone does not establish equivalent rigidity, positioning accuracy or bolt-in fit.

4.Festo: compare the axis and electrical package together

Festo electric axes cover spindle and toothed-belt designs, including EGC/ELGC families. Consider Festo when changing the Bosch axis also raises questions about motors, drives and automation integration.

• Price, drawings and OEM configuration:ask for the selected axis drawing and a part-numbered quotation at sample and production quantities.
• Accessories, motor/drive and integration:include the mounting kit, sensors, cables and selected drive package. Identify mechanical adaptation, PLC connection, programming and commissioning work.
• Freight, maintenance and support:confirm availability for the destination, delivery charges, service access, lubrication instructions and who provides startup support.

Replacement fit: useful when the electrical package is part of the decision. An axis catalogue and an integrated drive unit can represent different purchasing scopes; obtain the actual included-parts list.

5.Rollon: longer travel and handling layouts

Rollon’s belt-driven actuator families include E-Smart and R-Smart. They are relevant when a Bosch handling duty needs longer travel, a different carriage arrangement or a Cartesian layout.

• Price, drawings and OEM configuration:quote the complete axis or arrangement, with stroke, guide configuration, supports and interface drawings.
• Accessories, motor/drive and integration:include joining hardware, gearbox/motor adaptation, switches and cable management; identify bridge, frame and control changes.
• Freight, maintenance and support:assess long-package handling, transport costs and delivery access. Request the selected family’s lubrication, belt inspection, spares and support arrangements.

Replacement fit: begin with the motion architecture. A belt handling axis is a different engineering proposal from a compact screw actuator, and an unsupported span can change the selection.

6.IAI: compact motorized positioning

IAI’s RoboCylinder and IntelligentActuator families include guided sliders with integrated motors and encoders. These are candidates when a compact positioning task would benefit from a defined motorized actuator package.

• Price, drawings and OEM configuration:specify slider format, load direction, stroke, quantity and controller version; obtain its configured dimensions.
• Accessories, motor/drive and integration:identify controller, cable lengths, mounting brackets and programming requirements. Account for changes to the Bosch mounting and PLC interface.
• Freight, maintenance and support:confirm the delivery point, cable availability, maintenance instructions, replacement units and regional technical-support route.

Replacement fit: compare the complete electrical scope. “Motorized” does not settle whether the controller, communication options or commissioning are included. Rod-only actuator variants are outside a carriage-module comparison.

7.Parker: industrial axes with an engineered drive train

Parker’s HMR family offers ball-screw and belt versions with different profile, mounting and carriage options. It is relevant to industrial machinery where axis construction and drive selection need joint review.

• Price, drawings and OEM configuration:request the specific profile, stroke, carriage and configured CAD at the intended OEM quantities.
• Accessories, motor/drive and integration:list motor/gearbox, coupling, protection and sensing options. Check support surfaces, adapter work, drive sizing and control integration.
• Freight, maintenance and support:confirm regional order availability, freight terms, lubrication access, replacement items and the responsible service contact.

Replacement fit: check whether the profile requires continuous machine support or a different structural arrangement. The HMR name alone does not identify a Bosch-compatible mounting package.

8.igus: lightweight, lubrication-sensitive mechanisms

igus drylin driven modules offer lead-screw, belt and rack options. The relevant reason to compare them here is their motion architecture: selected lightweight, polymer-guided designs can suit handling or adjustment tasks where lubrication is undesirable.

• Price, drawings and OEM configuration:obtain a complete driven-axis quotation and drawing for the load, travel and duty; distinguish it from a guide-only product.
• Accessories, motor/drive and integration:specify motor, controller, sensors and mounting parts. Check friction, stiffness, frame alterations and control work.
• Freight, maintenance and support:confirm shipping scope, wear-part replacement, inspection intervals and application support for the actual environment.

Replacement fit: a useful lightweight-motion candidate when the duty suits the selected guide technology. Verify load, moment and precision requirements before substituting it for a rolling-guide Bosch axis.

9.NSK: integrated guided screw assemblies

NSK Monocarrier MCM/MCH assemblies combine ball-screw motion and linear guidance in a compact unit. This makes NSK relevant when an OEM wants a guided screw actuator, rather than a rail-and-screw component list.

• Price, drawings and OEM configuration:specify the series, lead, stroke, accuracy grade and quantity; request its mounting drawing and quoted assembly scope.
• Accessories, motor/drive and integration:include cover/sensor options, motor adapter, coupling and electrical package. Confirm carriage fit, mechanical changes and control work.
• Freight, maintenance and support:agree destination delivery, lubrication conditions, spare-part availability and technical assistance.

Replacement fit: distinguish mechanical and motorized offers. NSK’s Monocarrier overview separates standard mechanical assemblies from electrified versions; neither label proves compatibility with your Bosch part number.

Match the supplier to the Bosch duty before comparing price

The most useful Bosch Rexroth linear module alternatives are the suppliers that can return a suitable assembly for your actual machine. Start with the full Bosch code and drawing. Its linear-axis comparison distinguishes screw-driven MKK/CKK, belt-driven MKR/CKR and other families.

Drive, stroke and payload need to be evaluated together. Check both absolute positioning accuracy and repeatability where the process requires them; they describe different performance questions. For a vertical axis, include gravity loads and power-off holding. A good purchase also leaves access for adjustment and maintenance.

For projects involving Cartesian/gantry assemblies, precision platforms or integrated handling, use our multi-axis supplier shortlist by project fit to choose the relevant comparison group.

If price is your main concern

For the Bosch Rexroth linear module alternatives on your shortlist, make LIMON the priority RFQ when price and configurable OEM supply are central to the decision. TBI Motion and FUYU provide two additional sourcing routes to evaluate. Our value pick is LIMON for OEMs that want a configurable axis, direct selection support and a practical path from drawing review to production procurement.\

Value here means the fit between hardware, engineering work and purchasing support. The winning number is the completed project quotation.

TBI Motion: confirm the integrated actuator scope

TBI’s KP single-axis actuator integrates screw and guide functions. For an OEM quotation, request its selected dimensions, accessories, motor/drive arrangement and quantity basis together. Check adapter machining and integration, then add freight and obtain the maintenance and support terms. Compare that complete offer with the Bosch duty; a component quotation is a different scope.

FUYU: another configurable positioning source

FUYU’s module portfolio includes screw-driven, belt-driven and selected multi-axis products. Request the exact configuration, drawing and quantity-based price; specify accessories, motor, controller and cables. Check mechanical adaptation and integration work, then confirm packing/freight, maintenance instructions, replacement parts and destination support. Product-level documentation and sample acceptance should accompany the supplier evaluation.

Compare the full cost of Bosch Rexroth linear module alternatives

Now put the suitable suppliers on one worksheet. Which quotation is better value once every required item is present?

Keep the existing-brand benchmark in the worksheet

Include the incumbent option when it fits. Bosch Rexroth SMS is a compact screw-driven range that Bosch positions for small-parts handling and cost-sensitive electrification. It is the Bosch benchmark, outside the alternative-supplier count.

For a linear module cost comparison, record each item as quoted, included elsewhere, buyer-supplied or pending. An empty price field needs an answer. Count shared work once.

Initial installed project cost = quoted hardware and services + omitted purchases + buyer retrofit/integration/acceptance + excluded logistics charges. 

Keep the maintenance budget for the chosen service period alongside that total.

When comparing Bosch Rexroth linear module alternatives for repeat builds, separate one-time qualification and design work from recurring per-axis cost. Spread a one-time amount across the planned quantity only when that quantity is credible. Then consider linear actuator total cost of ownership over a stated period, with maintenance and support assumptions made visible. A structured investment framework provides a sound basis for that broader decision.

This is where linear module integration costs can change the result. A retained servo may avoid a new purchase, yet require a coupling, revised mount and retuning. Treat the linear module motor and drive package as a part-numbered delivery item so every supplier quotes the same responsibility.

For the right OEM duty, our recommendation remains to put LIMON on the value-focused RFQ first. Use the completed comparison to establish the project-specific advantage: suitable hardware, acceptable engineering work and a delivered cost that meets the budget.

Get comparable quotations and confirm the drawings

The best RFQ begins with the problem the existing configuration does not solve. Is it purchase cost, sourcing, travel, installation space, the motor arrangement or the delivery scope?

Send every shortlisted supplier the same revision of these inputs:

1.Existing Bosch part number and drawing, or the new machine’s mounting/interface drawing.

2.Actual working stroke, installation direction and available envelope.

3.Moving mass, tooling, center of gravity, external forces and moments.

4.Speed, acceleration, dwell, cycle rate and operating hours.

5.Repeatability and/or absolute positioning requirement, plus test conditions.

6.Environment, contamination exposure and maintenance-access requirements.

7.Existing or required motor, drive, PLC, protocol, feedback and power-off holding.

8.Required accessories, documents, inspection and acceptance scope.

9.Sample and production quantities, target dates and destination city/country.

10.Currency, quotation validity, named Incoterm/place and installation/support responsibilities.

For XY, XYZ or gantry work, use our OEM project input sheet for configurable multi-axis systems. It helps suppliers return proposals against the same workspace, moving mass, cycle and interface requirements.

A ball screw actuator quotation should identify the selected lead, stroke, guide arrangement, mounting version and exclusions. During linear actuator supplier qualification, compare the proposed CAD with the machine, agree sample tests and close every open scope item. Linear module replacement compatibility requires confirmation of the complete assembly: base holes, carriage holes, envelope, motor position, cables, controls and acceptance behavior.

Agree delivery and support for Spain, the US or another destination

Use the same named delivery point for every quotation. The ICC’s Incoterms 2020 guidance explains the allocation of delivery obligations, costs and risks. Ask who pays each transport, insurance, clearance and import item; the Incoterm alone does not provide the amount.

For LIMON, the published series split is built-in guideway types (KS, GSC/GCC, GTC), European-standard types (ITO, ITC, HTO, HTZ, ITZ) and Asian-standard types (YSO/YSC, YTO/YTC, YRO). Those labels describe the series family, not the manufacturing origin of the assembly, and lead time is confirmed per model in the quotation. Lead time starts after order, payment where applicable and technical confirmation; international transit is additional. Confirm the selected configuration and arrival plan in writing.

Our export arrangements include terms such as EXW, FOB and CIF; our quotation template is built on FOB Ningbo, and the Incoterm and named delivery point are agreed per shipment. Confirm the current packing, documents, payment and support terms with the quotation. Order-specific delivery and warranty terms govern the purchase.

Make the next quotation work harder

Choosing Bosch Rexroth linear module alternatives begins with supplier fit and ends with a complete project comparison. Start with LIMON in the nine-supplier comparison, match the axis architecture to the duty and use the price-focused RFQ section to compare the complete offer.

For OEM linear module sourcing, LIMON is our value pick for configurable axes backed by drawing review, sample qualification and direct technical support. Tell us what the machine must do, what your team can integrate and what should arrive with the shipment. Request your LIMON configuration and quotation, then compare the whole job.

FAQ

Which Bosch Rexroth linear module alternatives should a cost-conscious OEM quote first

LIMON is our value pick for a configurable OEM axis with selection, drawings, samples and procurement support. Add a technically suitable benchmark from the supplier list and request the same duty and supply scope. TBI Motion and FUYU offer further sourcing routes. The completed quotation establishes the actual cost difference.

Can another supplier’s module fit the Bosch mounting holes directly?

That requires a check of both configured drawings. Compare the base and carriage interfaces, moving envelope, motor, switches and cables, then confirm load, motion and controls. Budget any adapter and commissioning work before ordering.

What should the purchase price include?

Name the axis, accessories, motor/drive/cables, custom parts, documents, shipment and any services. Ask the supplier to mark each item included, separately priced or buyer-supplied. Include your own qualification, retrofit, integration and acceptance costs.

Does LIMON provide installation and after-sales support?

We provide selection support, applicable documents and remote/document-based installation and drive-setup guidance. Standard machine installation and integration remain with the buyer. Extra on-site or custom-platform work is arranged by project; covered quality faults follow the warranty terms stated in the quotation.