
- Built in Guideway Ball Screw Linear Actuator -
GSC Series
GSC SERIES LINEAR ACTUATOR
The body and sliding seat are formed in one, so the rigidity is enhanced.
Special steel strip structure design, reduce dust, can be used in dust-free environment
It can be installed without dismantling the steel strip
Increase the side of the body against the base level
There are positioning holes at the bottom of the body.
Small size saves space for installation
Aluminum body structure increases the strength, and grinding treatment after aluminum body embedded in track, therefore, the parallelism and straightness while walking will also be improved.
Classification: Close type
Drive type: Ball screw drive
Sealed type: Clean room environment, fully enclosed
Repetitive accuracy:±0.01mm
Strong carrying capacity
High-speed transplanting
Easy assembly and operation
Long stroke can be customized

GSC 50 | GSC 80 | GSC 120 | ||||||||||
Technical Parameters | Repetitive Accuracy (mm) | ±0.005 | ±0.005 | ± 0.005 | ||||||||
Ball Screw Lead (mm) | 5 | 10 | 20 | 5 | 10 | 20 | 5 | 10 | 20 | 32 | ||
Maximum Speed (mm/s) | 250 | 500 | 1000 | 250 | 500 | 1000 | 250 | 500 | 1000 | 1600 | ||
Maximum Payload | Horizontal (kg) | 30 | 15 | 10 | 50 | 30 | 18 | 110 | 88 | 40 | 30 | |
Vertical (kg) | 10 | 5 | 2.5 | 15 | 8 | 3 | 33 | 22 | 10 | 8 | ||
Rated Thrust (N) | 341 | 170 | 85 | 683 | 341 | 174 | 1388 | 694 | 347 | 218 | ||
Basic Specification | Stroke (mm) | 50-800 mm/50 Pitch | 50-1050 mm/ 50 Pitch | 50-1250 mm/50 Pitch | ||||||||
AC Servo Motor Output (W) | 100 | 200/400 | 400 | |||||||||
Ball Screw Diameter (mm) | C7 012 | C7 016 | C7 016 | |||||||||
Coupling (mm) | 7x8 | 11/14 | 10x14 | |||||||||
Home Sensor | PM-Y45(NPN) | PM-Y45(NPN) | PM-Y45(NPN) |